Hi, 2011 Ford Focus, EVO-ALL w/Fort 1 harness, stand alone and 2 original factory keys. Updated module to latest firmware prior to programming. Began programming process, hold program button-plug in black connector-release when red LED is on. Insert 1st key (yellow LED turns on) removed key, insert 2nd key (red LED stays on, no yellow LED), removed key, press program button within 5 seconds, red LED stays on and ignition does NOT turn on. Tried several times, won't complete programming. Went through troubleshooting with Flashlink Manager to no avail. I successfully installed a Fortin starter on a 2009 Ford Escape recently. Not sure what I am missing here. Any help would be appreciated. Thank you.